13 Gauge Street Cross members, Hat Posts, Rear Header and Roof Bows
12 Gauge Street Corner Posts with pre-punched light openings.
Frame Rails and Tongue Tubes made from 2" x 3" Rectangular Tubing.
Hat Posts on 16" Centers
Cross members and Roof Bows on 24" Centers.
2" Coupler with Tongue Mounted Top Wind Jack & Safety Chains.
Single 3000 Lb. Capacity Dexter Torflex Axle.
6' Wide Available with Single or Tandem 3500 Lb. Axles & Electric Brakes.
Steel Belted Radial Tires on White Spoke Wheels.
Entire Structure Coated with Rust Preventive Acrylic Enamel Gloss Black Paint.
Interior
3/8" Plywood Walls ( Finished One Side )
3/4" Plywood Floors ( Finished one side, Painted on Underside )
.030 Aluminum Caps in All Corners
Rear & Side Door Openings Trimmed with Aluminum Extrusions
Doors
5/8" x 21/2" Wooden Frame for Side & Double Rear Doors.
Welded Rectangular Street Tubing Frame for Ramp Doors.
Exterior Covered with .030" Smooth Aluminum
Interior Covered in Luan Plywood with .030" Aluminum Kick-plate.
Inside of Ramp Doors Covered in 3/4" Plywood.
Galvanized Hinges & Bar Lock Handles.
All Mounting Hardware Bright Zinc Plated.
Exterior
.030" Smooth Aluminum Sheets Attached with Stainless Steel Screws.
Aluminum Trim with Rubber Insert Molding
.030" Galvanized Roof with Crimped Seams & Luan Underlayment
Fiberglass Front Cap
Aluminum Fenders
Lighting
Recess Mounted Stop/Tail & Clearance Lights
Surface Mounted Clearance Lights on Fenders
Surface Mounted clearance Lights on Fiberglass Cap ( 6' Trailers Only )
